The Yealink W60P and W76P are advanced cordless DECT IP phones designed for optimal mobility and flexibility. These phones are ideal for businesses that require portability, remote working, and the ease of adding wireless handsets as needed.
Yealink cordless key features
Each kit includes a base station (W60B for W60P, or W70B for W76P) and a W56H handset. Depending on the model, you can register multiple handsets to one base and assign each handset to its own extension or DID (one per handset).
- Handset capacity: Up to 8 handsets (W60P) or up to 10 handsets (W76P).
- Repeater support: Up to 6 repeaters per base station.
- Battery: Up to 240 hours standby and up to 18 hours talk time (varies by usage and handset model).
- Range: Up to ~50 m indoors and up to ~300 m outdoors (environment dependent).
- Display: 2.4" color screen (handset), 240 × 320 resolution.
- Audio: HD voice for clearer calls.
- Conferencing: 3-way on-device conferencing.
Need a ruggedized handset?
The Yealink W59R is a rugged handset option that’s compatible with the W60B base station.
- Bluetooth: Built-in Bluetooth for added connectivity.
-
Safety functions:
- Push-button alarm
- No-movement alarm
- Man-down alarm
- Running alarm
-
Battery life:
- Up to 28 hours talk time (up to 18 hours with Bluetooth headset)
- Up to 360 hours standby (up to 200 hours with Bluetooth headset)
Yealink cordless button overview
Yealink cordless handsets use a familiar layout with soft keys and navigation controls. Use the guide below to identify the main buttons and indicators.
- Message Waiting Indicator light: Flashes red when a new voicemail message is waiting.
- Display screen: Access menus and features such as the handset phonebook, call log, and system settings.
- Soft keys: Select context-specific options shown on the screen above the keys.
- Voicemail key: Access voicemail from your handset. If voicemail to email (unified messaging) is enabled, messages may not save on the handset.
- Navigator key: Scroll and select options on the handset screen.
-
On-hook / Power key:
- Press briefly to return to the previous screen.
- Long press to return to the idle screen.
- Press and hold to turn the handset on or off.
- Mute key: Toggle your microphone on or off.
- Handset cradle: Charge the handset.
- Transfer (TRAN) key: Start an attended (warm) transfer while on a call.
-
Off-hook / Answer key:
- Answer an incoming call.
- Open the redial list.
- Place a call in receiver or headset mode.
- Speaker key: Turn the speakerphone on or off.
-
Paging key:
- Locate a misplaced handset.
- Toggle handset registration mode.
- Reset the base station to factory settings.
- Registration LED: Indicates handset registration status or paging mode.
- Network Status LED: Indicates network status.
- Power LED indicator: Indicates power status.
After the base station is successfully configured and the handset is registered, the LEDs on the base station glow green in sequence.
How to reboot Yealink cordless phones
You can reboot your device from the handset menu or by power cycling the base station.
Reboot from the handset menu
- Press OK.
- Select Settings.
- Select System Settings.
- Select Base Restart.
- Enter the PIN (default: 0000).
- Press the Done soft key.
Power cycle the base
- Remove the ethernet cable and power cable from the DECT base unit.
- Wait 30–60 seconds, then reconnect the cables.
